Give in to the Groove

Product details

About

Independent LED and photo-detector arrangement for the left and right channels

The new Grand Master optical cartridge system has been optimized by implementing an independent LED and photo-detector arrangement for the left and right channels. As a result, the cartridge output voltage has increased from 40mV to 70mV. The Grand Master cartridge offers an improved S/N ratio compared to its stable mates, resulting in an even lower noise floor and far greater musical clarity.

Weight of the shading plate is reduced by more than 50%

The implementation of independent left and right channel LEDs allow for the positioning of the optical system to be optimized as well as necessitating the use of a newly designed shading plate that has been significantly reduced in size compared to our earlier designs. In addition to this reduction in size, the material used to produce the shading plate has been changed from aluminum (as used in the second-generation cartridges) to 99.9% pure beryllium to reduce its mass further.

Diamond cantilever

The Grand Master is the first DS Audio cartridge to feature a diamond cantilever with a MicroRidge stylus. The unique cartridge body structure was designed to promote maximum rigidity. In addition, the Grand Master utilizes internal wiring 1.6 times thicker than used in the second-generation cartridges to reduce impedance.

Specifications

  • Signal output - Photo-electric Conversion
  • Channel separation - 27db more(1kHz)
  • Weight - 7.7g
  • Output signal level - 70mV more
  • Cantilever - Diamond
  • Body material - Ultra duralumin
  • Cantilever holder material - Stainless
  • Needle pressure - 2.0g~2.2g(2.1g is recommended)
  • Stylus - Micro Ridge

The power unit and equalizer unit are completely separate units

The DS Audio Grand Master system features a separate equalizer and power supply, each in an independent chassis. Using 2.34 million uF and 2.97 million uF electrolytic capacitors within the equalizer and power supply units, respectively, has resulted in a significantly stronger power supply design and improved reproduction of deeper low frequencies. In addition, the Grand Master equalizer incorporates special film capacitors custom-built to DS Audio’s specifications, along with non-induction winding resistors. The design features three transformers, each with a capacity 1½ times greater than that of the DS Master 1, one for the left and one for right channels, with the third handling the power supply to the optical cartridge.

A total of 6 optional low-frequency cut-off points

The Grand Master equalizer features single-ended RCA and balanced XLR outputs. Additionally, you can choose from 6 different low-frequency cut-off points, allowing it to seamlessly integrate with any hi-fi system.

Specifications

Signal output - Photo-electric Conversion
Channel separation - 27db more(1kHz)
Weight - 7.7g
Output signal level - 70mV more
Cantilever - Diamond
Body material - Ultra duralumin
Cantilever holder material - Stainless
Needle pressure - 2.0g~2.2g(2.1g is recommended)
Stylus - Micro Ridge

GIVE IN THE GROOVE

FAQs

Please read our FAQ before sending us a message.

How is my order processed ?

Once we have received your order and your payment, we issue you an invoice that will be mailed to you with a reference number for your order. Once your order is ready : it will be dispatched to you with insurance and tracking number.

Which payment methos are available in the Online Shop ?

You can choose between Paypal, bank transfer or Credit Card. Please take in consideration that payment via bank transfer will slightly delay the processing of your order as we have to receive your funds on our bank account to confirm your order.

Why are there different estimated delays prior to sending for some of the products

One of the politics of Ana Mighty Sound  is that every order is unique and made for a single customer. You will find next to each item an estimated delay prior to delivery. We will do our best to fulfill it before this delay (and most of the time we do).

Please keep in mind that we are a 100% human company working all over the Old World (Europe) and that we do commit to deliver you the best made / best quality product available, and to insure that : this can take some time.

Of course… some of our products are in stock !

Can I specify a courrier for my order ?

Yes you can ! Just drop us a line in the « additional remarks » of your mail order. This may add additional fees to your order. We can work with DHL, TNT, FedEX, UPS, French La Poste or Chronopost.

What if I have received the wrong item ?

In the very unlikely case this would happen just send us a photo of what you received and we will send you a courrier to fetch the item back. Once we have checked it out, we will send you the correct item.

My items are not up to specifications, what should I do ?

This is highly improbable as we use the most modern techniques to insure that our products are up to specs. In fact we even have a dedicated person checking that every single item is in perfect condition prior to shipping. Of course it can happen, but we doubt it seriously. In any case if you were bothered by something : just send us an email and we will sort it out with you.

I am very happy/disappointed with my order and I want you to know it ?

Please do not hesitate to drop us a line and we will be always happy to answer all of your requests. Our aim is your complete satisfaction.

Didn’t find your answer?

Don't hestitate to contact us